Description
| Test Names | Parameters | Standard | Range/ Specification | Country of origin | Accuracy | Resolutions | Required Time (hrs) |
| Sample Preparation | Cutting | ISO | 1. Traverse/Longitudinal cut (X-axis) = max. 100 mm 2. Cut-off (Y-axis) = Max. 80 mm |
Germany | N/A | 0.1mm | 30 |
| Mounting | ISO | Variables: Heating Temperature: 170 – 180℃ Pressure: 180 bar Holding time: 6 -10 min Powders used: Bakelite black/ Thermoplast/ Local powder |
Germany | N/A | N/A | 25 | |
| Grinding & polyshing | ISO 2407:1997 | Mounting diameter: 40 mm | Germany | N/A | N/A | 120 | |
| Macroscopic analysis | Failure analysis, surface analysis | ISO 15227:2000 | MAGNIFICATION: 8x-100x | Germany | 2 µm | N/A | 30 |
| Metalurgical analysis | Coating thickness measurement, | ISO 19055:2015 | MAGNIFICATION: 50x-1000x | Germany | 2 µm | N/A | 270 |
| Phase analysis. | Germany | 2 µm | N/A | 270 | |||
| Grain analysis | Germany | 2 µm | N/A | 270 | |||
| Microstructural analysis | Germany | 2 µm | N/A | 270 |
Reviews
There are no reviews yet.